Finish soft sheen
Drying Time 5 hours
- MOULD AND MILDEW RESISTANT
- GUARANTEE 5 YEARS
- MOISTURE AND STEAM RESISTANT
Tips & Advice
Preparing the Surfaces
To get the best results with Dulux Bathrooms, make sure surfaces to be painted are sound, clean, dry (new surfaces particularly must be fully dry) and free from all defective or poorly adhering material such as dirt, grease and wax. New or bare surfaces should be primed with an appropriate Dulux primer. Thoroughly rub down previously painted surfaces using ‘wet flatting’ methods where possible, then wipe off with a damp, lint free cloth. Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead. Treat knots with a suitable knotting solution. Any surface defects should be filled with the appropriate Polycell Trade Polyfilla.
After use, remove as much product as possible from equipment before cleaning with water.
Do not use or store in extremes of temperature and protect from frost. To prevent spillage, please store and transport upright.
Do you know the area?
Enter the height and the length of the surface you want to paint.
Great! Just add it below and find out how much you'll need.
Measure the height and length of the surface you want to paint (metres).
This is an estimate based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.Calculate again