Coverage up to 14m²/L
Drying Time 5 hours
- STAIN REPELLENT TECHNOLOGY
Tips & Advice
Preparing the Surfaces
To get the best results with Dulux Easycare Matt, make sure surfaces to be painted are sounds, clean, dry (new surfaces particularly must be fully dry.) Remove all loose and defective paint. Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead Where necessary, wash the surface to remove dirt, grease and powdery or dusty residues. Rinse with clean water and allow to dry. Seal surfaces that remain powdery after thorough preparation with an appropriate primer sealer. Where necessary, rub down and then wipe off with a damp lint free cloth, to avid dust. Any surface defects should be filled with the appropriate Pollycell Polyfilla.
After use, remove as much paint as possible from Brushes/Rollers before cleaning with clean water.
Do not use or store in extremes of temperature and protect from frost.To protect from spillage, please store and transport in an upright position.
Do you know the area?
Enter the height and the length of the surface you want to paint.
Great! Just add it below and find out how much you'll need.
Measure the height and length of the surface you want to paint (metres).
This is an estimate based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.Calculate again