Dulux High Gloss
Dulux High Gloss gives surfaces a tough durable high gloss finish.
Dulux High Gloss is a solvent-based finish suitable for the protection and decoration of most interior and exterior surfaces where a durable high gloss finish is required.
Apply with a roller or brush. For Health and Safety reasons relating to solvent based paint, spray application is not recommended.
To get the best results with Dulux High Gloss make sure surfaces to be painted are sound, clean and dry (new surfaces particularly must be fully dry). Remove all loose and defective paint. Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead. Where necessary, wash the surface to remove dirt, grease and powdery or dusty residues. Rinse with clean water and allow to dry. Seal surfaces that remain powdery after thorough preparation with an appropriate plaster sealer. Where necessary, rub down and then wipe off with a damp, lint free cloth to avoid dust. Any surface defects should be filled with the appropriate Polycell Polyfilla.
After use, remove as much product as possible from equipment before cleaning with brush cleaner
Do not use or store in extremes of temperature and protect from frost. To prevent spillage, please store and transport upright
Enter the height and the length of the surface you want to paint.
Great! Just add it below and find out how much you'll need.
Measure the height and length of the surface you want to paint (metres).
This is an estimate based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.Calculate again