Latest Covid-19 Ordering, Delivery & Service status updates here.

Dulux Paint Mixing Satinwood

Paint Calculator
This product is currently unavailable online. Please visit your nearest store.
{{!-- The where to buy button will be injected here --}}
Your Measurements:
Amount Needed:
For the best result we recommend to use {coatAmount} for {productTitle}
Key information
  • Finish Satin
  • Coverage up to 17m² per litre.
  • Drying Time 6 Hours
  • Coats 2
Product Features
  • NO UNDERCOAT REQUIRED
  • WASHABLE
  • HIGH COVERAGE

Product Description

Dulux Paint Mixing Satinwood is a solvent-based satin finish suitable for use on interior wood and metal surfaces. It is tough, hardwearing and dirt resistant, and does not require an undercoat (except in areas where a strong colour change is required), so it can be applied direct to suitably prepared surfaces. This product is ideal for creating your favourite colour mixing shades.

Application Description

Apply with a roller or brush.

Health & Safety

  • DU_IE_EN_SATINWOOD.pdf
  • DU_IE_EN_SATINWOOD.pdf

Tips & Advice

  • 1. Preparing the Surfaces
    Remove loose or flaking material. Make sure the surface is clean (no dirt or grease) and dry. If new, bare and absorbent surface, seal with this product, thinned 10% with water, or if very porous, use Dulux Sealer for Plaster. If the wall is damaged, repair using the appropriate Polycell product.
  • 2. Cleaning
    After use, remove as much product as possible from equipment before cleaning with brush cleaner.
  • 3. Storing
    Store paint in dry conditions and protect from extreme temperatures.