Dulux Stay White with Aquatech Satinwood
Dulux Stay White with Aquatech Primer Satinwood
Dulux Stay White Satinwood with Aquatech is a smooth and durable satin finish specially formulated for use on interior wood & metal. Our Aquatech formula ensures a stay white finish unlike conventional oil based paints that tend to yellow over time. It is low odoour, easy to apply and drys within 6 hours to a smooth flawless finish
STIR THOROUGHLY BEFORE USE. Apply using a clean, good quality brush that is the right size for the job will give the best results. Apply 1 or 2 coats of Dulux Aquatech Gloss. Where strong colour change is involved, 2 or more coats may be required. Allow 4-6 hours between coats. Do not spread paint too far. Replace the lid firmly on the can and shake to ensure an airtight seal.
To get the best results with Dulux Aquatech Satin, make sure surfaces to be painted are sound, clean, dry (new surfaces particularly must be fully dry).
After use, remove as much paint as possible from equipment before cleaning with water.
Do not use or store in extremes of temperature and protect from frost. To prevent spillage, please store and transport upright.
Enter the height and the length of the surface you want to paint.
Great! Just add it below and find out how much you'll need.
Measure the height and length of the surface you want to paint (metres).
This is an estimate based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.Calculate again