Dulux Undercoat is a solvent based formulation, the ideal partner for Dulux High Gloss
To get the best results, ensure surfaces to be painted are sound, clean and dry (new surfaces particularly must be fully dry) and free from all defective or poorly adhering material such as dirt, grease and wax. New or bare surfaces should be primed with an appropriate Dulux primer. Thoroughly rub down previously painted surfaces, using ‘wet flatting’ methods where possible, then wipe off with a damp, lint free cloth. Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead. Treat any knots in wood with an appropriate knotting solution. Any surface defects should be filled with an appropriate Polycell Polyfilla
After use, remove as much product as possible from equipment before cleaning with brush cleaner.
Do not use or store in extremes of temperature and protect from frost. To prevent spillage, please store and transport upright.
Enter the height and the length of the surface you want to paint.
Great! Just add it below and find out how much you'll need.
Measure the height and length of the surface you want to paint (metres).
This is an estimate based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.Calculate again