Dulux Paint Mixing Satinwood
A solvent-based satin finish suitable for use on interior wood and metal surfaces.
Dulux Paint Mixing Satinwood is a solvent-based satin finish suitable for use on interior wood and metal surfaces. It is tough, hardwearing and dirt resistant, and does not require an undercoat (except in areas where a strong colour change is required), so it can be applied direct to suitably prepared surfaces. This product is ideal for creating your favourite colour mixing shades.
Apply with a roller or brush.
Remove loose or flaking material. Make sure the surface is clean (no dirt or grease) and dry. If new, bare and absorbent surface, seal with this product, thinned 10% with water, or if very porous, use Dulux Sealer for Plaster. If the wall is damaged, repair using the appropriate Polycell product.
After use, remove as much product as possible from equipment before cleaning with brush cleaner.
Store paint in dry conditions and protect from extreme temperatures.
Enter the height and the length of the surface you want to paint.
Great! Just add it below and find out how much you'll need.
Measure the height and length of the surface you want to paint (metres).
This is an estimate based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.Calculate again