Satin
Colour and Product Guide
Explore our handy colour and product guide for inspiration, a colour chart and product information.
Satin
Drying Time Dependent on the temperature and humidity Recoatable 6 hours
Up to 12M2L
2 Multiple coats
Apply by brush or roller. For best results use good quality synthetic (nylon polyester) brush or short pile synthetic/mohair roller designed for the application of water-based paints.
STIR THOROUGHLY BEFORE USE. The normal finishing process is 2 full coats of Dulux Trade Diamond Satinwood. Where a strong colour change is involved then a coat of Dulux Trade Quick Dry Undercoat may be required.
Water-borne coatings can be sensitive to rubber containing plasticisers such as flexible PVC strips. The paint film may partially dissolve due to these plasticisers and become sticky. It is advisable to replace such flexible strips with those made of EPDM rubber. We recommend that you seek the advice of the manufacturers of the strips regarding this problem.
Avoid contact with skin and eyes. Avoid inhalation of vapour, spray or mist. Eating, drinking and smoking should be prohibited in areas where this material is handled, stored and processed.
Basepaint - 2.50l Base paint article number: 5282787
Basepaint - 5.00l Base paint article number: 5287992
Basepaint - 2.50l Base paint article number: 5282781
Basepaint - 5.00l Base paint article number: 5282785
Basepaint - 1.00l Base paint article number: 5282779
Ready Mixed - 2.50l Base paint article number: 5282774
Ready Mixed - 5.00l Base paint article number: 5282776
Ready Mixed - 2.50l Base paint article number: 5282772
Basepaint - 1.00l Base paint article number: 5282786
Surface preparation:
To get the best results with Dulux Trade Diamond Satinwood, make sure surfaces to be painted are sound, clean and dry (new surfaces particularly must be fully dry).
Cleaning instructions:
Cleaning After Final Use: Cleaning your brushes and rollers immediately after their final use ensures they can be reused for multiple projects, saving you money and reducing waste. Cleaning: 1. Remove Excess Paint: Scrape off excess paint into container for future projects. 2. Clean with Warm, Soapy Water: Use warm, soapy water in a sealed container, such as a bucket or empty tub, to clean your brushes and rollers. 3. Rinse Thoroughly: Ensure all soap and paint residues are completely rinsed out into container. 4. Dry Naturally: Allow brushes and rollers to dry naturally and store them in a dry, dust-free place. 5. Allowing solids to settle: Allow the paint solids to settle at the bottom of the container. Once settled, pour the clear water into another container for reuse or disposal. 6. Responsible Disposal: Let the remaining paint solids dry out completely and dispose of them as solid waste. Do not flush paint down the drain, including when cleaning painting tools
Storage instructions:
1. Reuse, Recycle, or Donate: Whenever possible reuse, recycle, or donate leftover paint. Find local services at mywaste.ie or consider advertising the paint locally. Many good causes often need paint, and a little can go a long way in brightening up community spaces!
2. Dispose Responsibly: Never pour paint or wastewater down drains or sinks. Dispose of them responsibly. Follow the instructions at my waste.ie to recycle empty packs
3. Reuse Roller Cages: Roller cages can be reused. Simply remove the sleeve and store the cage in a dry, dust-free place.
4. Dispose of Unusable Brushes and Sleeves: If your brush or roller sleeve cannot be cleaned or reused, place it in your general waste bin. While recycling is important, bristles or roller sleeves with paint can cause issues at recycling facilities, so it's best to dispose of them correctly.